ProFix Digital Conductance Tester, 6/12 V
Battery tester for 6/12 V batteries: a carbon-pile load test or a conductance check with no drain.
Test lamps, multimeters, battery chargers and code readers
The everyday electrical side of a workshop: test lamps that do not load the circuit they are checking, multimeters with a usable backlight, smart chargers that can be left connected, and code readers for the jobs that do not justify a full diagnostic platform.
Chargers in this category are maintainers as well as chargers, with a trickle mode that will not boil a battery left on over winter. Note the supply voltage and the plug type with your order — the chargers ship with an US plug unless you ask for a UK one.
Battery tester for 6/12 V batteries: a carbon-pile load test or a conductance check with no drain.
Battery tester for 6/12 V batteries: a carbon-pile load test or a conductance check with no drain.
10 A charger and maintainer for 12 V and 24 V batteries, with float and repair modes and an US plug.
20 A charger and maintainer for 12 V and 24 V batteries, with float and repair modes and an US plug.
2 A charger and maintainer for 12 V and 24 V batteries, with float and repair modes and an US plug.
5 A charger and maintainer for 12 V and 24 V batteries, with float and repair modes and an US plug.
Workshop meter for 600 A: auto-ranging multimeter, clamp meter and insulation tester.
Workshop meter for 600 V CAT III: auto-ranging multimeter, clamp meter and insulation tester.
Workshop meter for 1 000 V: auto-ranging multimeter, clamp meter and insulation tester.
Lithium jump starter with a 12 000 mAh pack at 12 V, with or without a built-in tyre compressor.
Lithium jump starter with a 20 000 mAh pack at 12 V, with or without a built-in tyre compressor.
OBD2 scanner from basic fault-code reading to live data and multi-system ABS, airbag and transmission access.
OBD2 scanner from basic fault-code reading to live data and multi-system ABS, airbag and transmission access.
OBD2 scanner from basic fault-code reading to live data and multi-system ABS, airbag and transmission access.
2-channel handheld automotive scope with a 20 MHz bandwidth for signals a multimeter cannot show.
4-channel handheld automotive scope with a 50 MHz bandwidth for signals a multimeter cannot show.
A 6–24 V circuit tester for tracing feeds, earths and shorts — bulb, LED or powered probe.
A 12–24 V circuit tester for tracing feeds, earths and shorts — bulb, LED or powered probe.
A 6–24 V circuit tester for tracing feeds, earths and shorts — bulb, LED or powered probe.