ProFix Drip Emitters, Pack of 50
Parts in polypropylene, G1/2 / G3/4 threads, worked at a 2.5 bar working pressure — water goes to the root zone, not to the air.
ProFix
★ 4.5 (n_reviews)
ABS plastic housing, G1/2 / G3/4 threads and a 6 bar working pressure — set it once and the watering happens while you are not there.
paym_card paym_paypal
🔒 pay_secure_short
| Shipping method | Sea freight DDP — the lower 48 states, door to door |
|---|---|
| Duty status | DDP — import duty, clearance and door delivery included |
| Delivery time | 45–60 days door to door |
| Programmes | Two independent lines, separate run times |
| Power | 2 × AA batteries (not included) |
| Thread | G1/2 / G3/4 |
| Housing | ABS plastic |
| Working pressure | 6 bar |
| Weight | 0.6 kg |
| Packed size | 20 × 16 × 10 cm |
A timer is the cheapest way to keep a garden alive through a hot spell, and the differences that matter are mechanical rather than electronic: whether the valve is a proper solenoid or a plastic paddle, whether the housing is sealed against the weather, and whether the manual override works with wet hands.
This listing is the Digital Watering Timer, Two Outlets, in ABS plastic, with G1/2 / G3/4 threads for standard the lower 48 states taps and a working pressure of 6 bar. A tap timer is only as good as the pressure behind it — below about one bar the valve may not close fully, so check the run of the system before relying on it unattended.
Digital Watering Timer, Two Outlets. ABS plastic housing, G1/2 / G3/4 threaded inlet and outlet, working pressure 6 bar. Manual override works with the housing closed, so a schedule can be interrupted without dismantling anything.
Check the size and quantity against your own job first: most returns in this category come from ordering the wrong diameter, finish or pack size rather than from a fault. If you are unsure, send us a photo or a measurement and we will confirm which variant you need.
Parts in polypropylene, G1/2 / G3/4 threads, worked at a 2.5 bar working pressure — water goes to the root zone, not to the air.
Parts in polypropylene, G1/2 / G3/4 threads, worked at a 3.0 bar working pressure — water goes to the root zone, not to the air.
Parts in polypropylene, G1/2 / G3/4 threads, worked at a 1.0 bar working pressure — water goes to the root zone, not to the air.