ProFix Drip Emitters, Pack of 50
Parts in polypropylene, G1/2 / G3/4 threads, worked at a 2.5 bar working pressure — water goes to the root zone, not to the air.
ProFix
★ 4.5 (n_reviews)
ABS plastic housing, G1/2 / G3/4 threads and a 6 bar working pressure — set it once and the watering happens while you are not there.
paym_card paym_paypal
🔒 pay_secure_short
| Shipping method | Sea freight DDP — the lower 48 states, door to door |
|---|---|
| Duty status | DDP — import duty, clearance and door delivery included |
| Delivery time | 45–60 days door to door |
| Programmes | Up to 3 start times per day, 1 to 120 minutes each |
| Power | 2 × AA batteries (not included) |
| Thread | G1/2 / G3/4 |
| Housing | ABS plastic |
| Working pressure | 6 bar |
| Weight | 0.45 kg |
| Packed size | 18 × 14 × 9 cm |
A timer is the cheapest way to keep a garden alive through a hot spell, and the differences that matter are mechanical rather than electronic: whether the valve is a proper solenoid or a plastic paddle, whether the housing is sealed against the weather, and whether the manual override works with wet hands.
This listing is the Digital Watering Timer, Single Outlet, in ABS plastic, with G1/2 / G3/4 threads for standard the lower 48 states taps and a working pressure of 6 bar. A tap timer is only as good as the pressure behind it — below about one bar the valve may not close fully, so check the run of the system before relying on it unattended.
Digital Watering Timer, Single Outlet. ABS plastic housing, G1/2 / G3/4 threaded inlet and outlet, working pressure 6 bar. Manual override works with the housing closed, so a schedule can be interrupted without dismantling anything.
Orders are consolidated and re-weighed at intake, and freight is re-calculated on the actual chargeable weight. If you are ordering several items for one address, ask us for a combined quote before paying — mixing light and bulky items usually brings the freight share down.
Parts in polypropylene, G1/2 / G3/4 threads, worked at a 2.5 bar working pressure — water goes to the root zone, not to the air.
Parts in polypropylene, G1/2 / G3/4 threads, worked at a 3.0 bar working pressure — water goes to the root zone, not to the air.
Parts in polypropylene, G1/2 / G3/4 threads, worked at a 1.0 bar working pressure — water goes to the root zone, not to the air.