Coalition
Set the pressure and walk away - it inflates, checks and deflates to within ±0.05 bar, on ten metres of hose.
| Model | BN-BGCQ001 |
|---|---|
| Type | Wall-mounted, full-automatic intelligent inflator |
| Suitable vehicles | Motorcycle, car, small and medium-sized vehicles |
| Suitable industries | Tire shop, beauty shop, fast repair shop, repair factory |
| Working pressure | 1–7 bar / 15–102 psi |
| Input air pressure | 8–10 kg/cm² (8–10 bar) |
| Output pressure | 7 kg/cm² (7 bar) |
| Accuracy | ±0.05 |
| Display | LCD screen, digital readout |
| Units | bar / psi / kPa, switchable |
| Inflation mode | Full-automatic: inflate, deflate, check |
| Hose | 10 m rubber tube |
| Air quality | Oil content ≤ 0.03%, dew point ≤ 2 °C |
| Breaking pressure | 15 kg/cm² (15 bar) |
| Power supply | AC 220 V / 50 Hz |
| Frequency | 50 Hz |
| Overall size | 430 × 80 × 300 mm |
What "automatic" actually means here
There are three jobs in setting a tire — filling, checking and correcting over-pressure — and this machine does all three. You key in the target on the display, press the air key, and the inlet valve opens. When the sensor reads the set point, the valve closes and the buzzer sounds. If the tire came in over-pressure, the machine vents it back down to the set point: no gauge-watching, no thumb on a bleed valve, and the same result whether a technician or an apprentice is holding the hose.
Accuracy is the product
A tire that leaves 0.3 bar high comes back as a handling complaint; one that leaves low comes back as a wear claim. The BN-BGCQ001 reads to ±0.05 on a digital display with a 1–7 bar working range, and the panel switches units between bar, psi and kPa with the switchover key — so a customer's psi spec and your technician's bar reading are the same number, not a conversion made in someone's head.
Ten metres of hose changes the workflow
10 m of rubber hose is enough to reach the far corner of a long-wheelbase van with the vehicle still on the ramp, and enough to serve a second bay from the same wall unit. The hose returns to a hook beside the body, so it is off the floor between jobs — which is also the single biggest thing that stops a hose getting driven over.
Wall space instead of floor space
At 430 × 80 × 300 mm and mounted at eye level, the unit gives you back the square metre a wheeled inflator occupies and puts the display where a technician actually looks. Nothing to trip over, nothing to roll away, nothing to lose. The body is a sealed wall cabinet with the controls on the front face, so the working parts stay out of the way of the hose and the tools.
What it needs from your workshop
This is an inflator, not a compressor — it takes shop air at 8–10 kg/cm² (8–10 bar) and delivers up to 7 kg/cm². Run it off a filtered, dried line: the unit is rated for air with oil content ≤ 0.03% and a dew point ≤ 2 °C, and a cheap coalescing filter upstream is far less expensive than a blocked valve. Electrical supply is AC 220 V / 50 Hz as listed; a 15 kg/cm² breaking pressure protects the body if the inlet regulator fails.
Smart vertical tire inflator that automatically inflates, deflates and checks tire pressure with preset precision - ideal for tire shops, beauty shops and fast repair workshops.
Flush-to-floor alignment lift: 5,000 kg main platform, 430 mm sub-platform, 60-second rise.
5 m deck, 5,000 kg, flush with the floor: the alignment lift for long-wheelbase vans.