QL-DM70/40C Single-Station Sanding & Prep Booth (7 × 4 m)
Single-station sanding / prep booth, 7 × 4 m, rear-wall extraction with activated-carbon VOC filtration.
Profix
Traffic-certified centralized-heating spray booth with QL-XF10K activated-carbon cabinet.
| Heating method | Centralized electric heating |
|---|---|
| Outer dimensions (L×W×H) | 7000×4000×3400 mm |
| Inner dimensions (L×W×H) | 6900×3900×2650 mm |
| Plenum chamber | 450 mm |
| Floor base height | 380 mm |
| Voltage / frequency | 380 V / 50 Hz (customizable: 200 V/60 Hz, 440 V/60 Hz, 380 V/60 Hz) |
| Platform | mm Galvanized enclosure structure, 1.2 mm thick galvanized steel sheets. Three rows of hot‑dip galvanized 30×5 mm steel gratings are installed in the middle of the booth, and two rows of 3 mm anti‑slip plates on both sides. Surfaces are electrostatic powder‑coated. Load‑bearing brackets adopt 40×80×2.0 mm galvanized square tubes. |
| Main door | 3000×2600 — Four‑leaf Hand‑built Sheet‑metal Main Doors Each door adopts 0.8 mm powder‑coated galvanized steel sheets for inner & outer panels, covered with protective films on both sides to avoid scratches. Door inner frame is welded with 1.2 mm galvanized keels. 6 mm cold‑rolled steel embedded plates are welded to keels at hinge locations to avoid door sagging. 180×120×15 mm aluminum‑alloy hinges provide high strength and nice appearance. Observation window: high‑temperature resistant rubber seal strips + 5 mm rounded tempered glass for safety.18 kg fire‑retardant filler is bonded inside the door to ensure panel flatness. |
| Emergency exit door | 680*2000 — mm thick aluminum alloy edge wrapping ensures good sealing and anti‑deformation performance. |
| Wall material | mm rock wool sandwich panel with 0.426 mm double‑sided steel sheets and 100 kg/m³ rock‑wool density.Side reinforcing keels avoid tearing during loading & unloading and enhance wind‑pressure resistance.Inner‑outer protective films reduce surface scratches. |
| Roof panel | mm rock wool panel, double‑sided 0.426 mm steel sheet, rock wool density: 100 kg/m³. |
| Floor slope | three options available: inner‑side 1m slope, outer‑side 1m slope, full outer‑side slope. |
| Supply fan | h Equipped with one Yancheng Hengkang DDF series single‑inlet centrifugal fan, Model 630B, 7.5 kW variable‑frequency motor. Air volume: 28000‑30000 m³/h, total pressure: 600 Pa. Side‑top air intake, loaded wind speed: 0.38‑0.45 m/s; air change rate: 330 times/h. |
| Exhaust fan | pa Equipped with one 4‑82‑5.6E 11 kW turbo exhaust fan, air volume: 26386 m³/h, total pressure: 1082‑741 Pa. |
| Heating system | mm Heated by centralized 304 stainless steel fin‑type electric heating tubes, consisting of modified magnesium oxide powder, high‑resistance electric heating alloy wires, ceramic insulated terminals and stainless steel cooling fins. Fins wrapped around tube surfaces for air heat exchange, rust‑proof and high‑temperature resistant. 12 heating tubes, 5 kW each; total 60 kW. 20‑min heat‑up time to 60℃ baking temperature, max set temperature 80℃. Supports heating‑up spraying, with circulating damper for spray‑bake cycle. Independent heater cabinet mounted on supply fan cabinet, frame welded from 50×50×1.4 mm formed profiles with powder‑coated surface, covered with 20 mm high‑strength sound‑absorbing machine‑made rock wool panels. Wiring area is externally separated from heat exchange zone; silicone‑mica braided high‑temperature wires adopted with star‑connection wiring. Adopt upper‑damper heating for fire safety of baking booth, preventing paint residue on floor filters and gratings from being blown onto heating tubes to avoid fire hazards and guarantee heater heat‑exchange efficiency. |
| Control system | Mechanical‑type control cabinet with Delixi (China well‑known brand) electrical components. Independent circuit breakers for main control, fans and lighting. Fitted with lighting switch, spray switch and working indicators. Supports heating‑up spray mode, baking temperature adjustment, time setting and emergency stop. Each two groups of heating lamps have separate control. Fans are equipped with thermal overload protection. |
| Air filtration | bag filter cotton, effectively filters dust particles larger than 10 μm. Top filter: CC‑600G sub‑high‑efficiency filter cotton, effectively filters dust particles larger than 5 μm. TSP value: ≤1.4 mg/m³. |
| Exhaust treatment | pa Activated carbon adsorption method, cabinet dimensions: L1600×W1250×H2500 mm (motor excluded). Two‑stage primary plate filter cotton for pre‑treatment, 6‑layer honeycomb activated carbon with iodine value ≥600, approx. 1 m³. Equipped with one 4‑82‑5.6E 11 kW turbo exhaust fan, air volume: 26386 m³/h, total pressure: 1082‑741 Pa. |
| Exhaust duct | 700*700*910 — three straight sections plus one elbow, dimension 700×700×910 mm, machine‑formed from 0.8 mm galvanized steel sheet. |
QL-DJ70/40A + QL-XF10K — The QL-DJ70/40A is the traffic-certified (Ministry of Transport) premium model of the centralized electric heating series. Inner dimensions 6900×3900×2650 mm, outer 7000×4000×3400 mm.
Heating: Heated by centralized 304 stainless steel fin‑type electric heating tubes, consisting of modified magnesium oxide powder, high‑resistance electric heating alloy wires, ceramic…. Air side: Equipped with one Yancheng Hengkang DDF series single‑inlet centrifugal fan, Model 630B, 7.5 kW variable‑frequency motor. Air volume: 28000‑30000 m³/h, total pressure: 600 Pa.… Exhaust: Equipped with one 4‑82‑5.6E 11 kW turbo exhaust fan, air volume: 26386 m³/h, total pressure: 1082‑741 Pa..
Structure: 50 mm rock-wool sandwich panels (100 kg/m³), four hand-built sheet-metal main doors 3000×2600 mm with tempered-glass observation windows, one aluminium-edged emergency exit door, galvanized raised floor with steel gratings (slope options available). Control: Delixi mechanical control cabinet with independent breakers, temperature/time setting and emergency stop. Intake filtration: Intake filter cotton + CC-600G ceiling filters. TSP value ≤ 1.4 mg/m³. Exhaust-gas treatment (activated-carbon cabinet or photocatalytic unit) is available as an option.
Voltage 380 V/50 Hz as standard; 200 V/60 Hz, 440 V/60 Hz and 380 V/60 Hz available on request. Sea freight, SKD packed; contact us for a quotation.
Single-station sanding / prep booth, 7 × 4 m, rear-wall extraction with activated-carbon VOC filtration.
Two-station sanding / prep booth sharing one 5.5 kW exhaust system — saves floor space and equipment cost.
Three-station sanding / prep booth, 7 × 12 m, shared extraction with activated-carbon VOC filtration.