HPB-150Z 150-Ton Hydraulic Bending Press
150-ton hydraulic bending press with 320 bar system pressure and 30 L/min pump.
Bench and floor-standing presses for press-fit work
Workshop presses cover press-fit work on bearings, bushes and silent blocks, plus straightening and forming tasks. Decide between bench-mounted and floor-standing frames by the workpiece size, then check ram stroke, working range between tables and whether a pressure gauge is fitted. Tonnage ratings refer to the ram, so size the press for your heaviest press-fit job.
150-ton hydraulic bending press with 320 bar system pressure and 30 L/min pump.
100-ton four-post hydraulic press with 320 bar pressure and 15 L/min pump.
1000 kN workshop press with 27 MPa pressure, 600 mm working width and 3 kW motor.
Four-column sliding press series from 1000 to 5000 kN with 31.5 MPa working pressure.
Compact blue HP-50 hydraulic press for everyday workshop pressing and straightening.
Open-side C-type press series from 200 to 1000 kN with three-sided access for large workpieces.